CF420 Tree Branches Hammer Mill

• Type: Hammer Mill
• Voltage: 380V
• Automatic Grade: Automatic
• Controlling Mode: Switch
• Energy Saving: Energy Saving
• Certification: CE, ISO
• Model NO.: CF420
• Warranty: 1 Year
• Customized: Customized
• Condition: New
• Color: Green
• Capacity: 100-1500kg/H
• Raw Material Diameter: Below 5cm
• Spare Parts: Sieve and Knives
• Sieve Size: 2.8mm to 12mm
• Transport Package: Plywood Box
• Specification: small model for family use
• Trademark: chengda
• Origin: China
• HS Code: 8479820090
• Production Capacity: 5000 Piece Per Year

Product Description

Introduction of the electric motor driven CF420-CF800 hammer mill




The hammer mill is newly developed machine which is endowed with many advantages compared to other kind of crushers such as simple construction, convenient operation, high efficiency, saving power consumption, and safe condition. It is suitable to crush raw materials with small size such as tree branches, bamboo, wood scrap, cardboard, newspaper, straw, crop stalks, corn cobs and other biomass waste etc. After crushing, raw materials are uniform and with proper moisture content to meet further processing. With capacity 200-700kg/h, it is can surely meet the production requirement in the farms, middle sized feeding factory or family.

Features of the hammer mill





 

1. With capacity 300kg---2500kg/h, this hammer mill can satisfy a large production demand on a daily basis.
   2. The ability to change screen size from 1.5-10mm, the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill.
   3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen
   4. The core part ---the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
   5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
   6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing.
   7. The rotor of hammer mill operates at 3,500 RPM to produce high hammer tip speed, thus the finished powder can be uniform with a smaller size.

Specifications of the electric motor hammer mill

Model	Power	Wood capacity (kg/h)	Feed capacity (kg/h)	Packing size cm	N/G weight kg
CF420B	7.5KW/380V	350~650	500-800	112*82*107	260/320
CF420C	11KW/380V	400~700	600-1000	112*82*107	320/360
CF500	22KW/380V	700~1000	1200-1500	124*97*108	600/630
CF500	30KW/380V	800~1200	1500-2000	124*97*108	620/650
CF600	37KW/380V	1000~1500	2000-2500	150*110*115	850/900
CF800	55KW/380V	1500~2500	2500-3500	180*130*120	1200/1250

 Function of the electric motor hammer mill

The hammer mill is fixed with an engine with a power of RP-driven all kinds of different power. Its working principle is: after the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step-by-step. The sieve have the following size: 1.5mm, 2mm, 4mm and 6mm. Then the crushed materials will leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge, finally, the powder will be discharged down below, and the air will be discharged upper.