Straw grinding hammer mill---CF420C
| Hammer mill is new- style and multipurpose machine, it is used for all kinds of straw, cotton stalk, alfalfa, peanuts shell and foodstuffs etc. |
| 2. CF420C hammer mill is driven by 11kw, 380V, 50Hz electrical motor. |
| 3. The capacity of CF420C is 200-500kg/h, it is suitable for home use. |
| 4. It has simple construction, convenient operation, high efficiency and low power consumption. |
| 5. CF420 can also be driven by 15hp diesel or 22hp diesel engine, we called it CF420A. |
Diesel engine Driven CF420A Wood Hammer Mill
CF420C Hammer Mill Testing on 22 April, 2016
Working principle
The hammer mill is fixed with an engine and a power of RP-driven all kinds of different power.
After the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step by step. Then the crushed materials will be leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge. Finally, the powder material will be discharged down below and the air will be discharged upper.
More videos on Youtube:
https://chengdamachine.en.made-in-china.com
Technical Parameters of Wood Hammer Mills
| Model |
Power |
Voltage V/50Hz |
Sieve Screen Size |
Sieve Screen Size |
Capacity |
| CF158 |
2.2KW |
380V |
360*160mm |
1.5-10mm |
60-120kg/h |
| CF198 |
4KW |
380V |
510*200mm |
2-10mm |
200-300kg/h |
| CF198A |
7.5HP |
380V |
510*200mm |
2-10mm |
200-300kg/h |
| CF420B |
7.5KW |
380V |
680*280mm |
2-10mm |
200-500kg/h |
| CF420C |
11KW |
380V |
680*280mm |
2-10mm |
200-500kg/h |
| CF420A |
15HP |
380V |
680*280mm |
2-10mm |
200-500kg/h |
| CF420A |
22HP |
380V |
680*280mm |
2-10mm |
200-500kg/h |
| CF500 |
22KW |
380V |
820*380mm |
2-10mm |
800-1100kg/h |
| CF500A |
55HP |
380V |
820*380mm |
2-10mm |
800-1100kg/h |
Main Features of Wood Hammer Mills
1. With capacity 60-120kg/h, this hammer mill can satisfy a large production demand on a daily basis.
2. The ability to change screen size, and the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill.
3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen.
4. The core part ---the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing
| FAQ |
| 1. How to order? |
After you decide to purchase, we will send you proforma invoice with our bank information,
bring this PI to the bank, and ask to make T/T for the payment. For single set, your machine can be ready within 30-45 days after we getting the payment, we will send to the port and deliver to you by sea. |
| 2. Related products? |
| CF158 |
| 3. How to get to your factory? |
| Our company is located in Sanlihezi Village, Wenfeng Road, Laizhou, Shandong province, near Qingdao, if you arrive in Qingdao Liuting Airport, we can drive to Qingdao to pick you up to our factory. |
| 4. How long is your warranty period? |
| One year |
| 5. How does your factory do quality control? |
| Our factory has gained CE certificate and ISO certificate. " Quality is priority" we always pay great attention on quality controling from the begining to the end. |
|
Contact information
Tel:+8615805353812
){kind=link}