KL260B Flat Die Pellet Mill Introduction
Electric flat die pellet mill is driven by electric motor which makes it more energy-saving and environmentally friendly. This electric flat die pellet mill is smaller in size, design and structure with capacity 150-190kg/h for making wood pellets, 300-400 kg/h for making feed pellets. Roller and flat die are made from precise material of alloy metal which makes this core part wear-resistant and not easy to break. With this pellet mill, if you want to make biomass pellets, you would better use relatively soft materials, as the machine design is stationary rollers and a running die mould. Ready-to-get raw agro waste materials are sawdust, wood chips, peanut shell, wheat straw, cotton, barley, branch, rice husk, sunflower stalk, palm kernel shell and many other materials.
Specifications:
1. This series machine can be powered by both diesel engine and e-motor.
2 .We adopt the new design of direct connection of motor shaft and he main shaft that overcome the loose defect of belt connecting as long time using.
3. High accuracy gearbox and high output.
4. It is widely used in large,middle, small scale aquatic. food and feed processing factory,
livestock farm, poultry farm, individual raisers, middle and small farm.
5. International advance steam fittings and imported pressure reduction valve.
6. Flat die is made with international advanced equipment for long lifespan.
7. Drive with heavy duty gearbox, which can produce continuously in most adverse condition.
Data of KL-B series pellet mill
| Model No. |
Power(E-motor) 50HZ |
Feed output |
Wood output |
N/G weight(kg) |
Pellet diameter |
Packing Size(cm) |
| KL120B |
2.2kw220v 1phase |
30-60 |
20-30 |
80/100 |
2.5-10mm |
75*32*62 |
| KL120B |
3kw 380v 3phase |
50-100 |
30-50 |
80/100 |
2.5-10mm |
75*32*62 |
| KL150B |
4kw 380v 3phase |
100-200 |
50-100 |
95/115 |
2.5-10mm |
77*34*68 |
| KL200B |
7.5kw 380v 3phase |
200-300 |
110-140 |
200/230 |
2.5-10mm |
100*43*95 |
| KL230B |
11kw 380v 3phase |
300-400 |
150-190 |
290/320 |
2.5-10mm |
114*47*97 |
| KL260B |
15kw 380v 3phase |
400-600 |
220-280 |
330/360 |
2.5-10mm |
120*52*107 |
| KL300B |
22kw 380v 3phase |
600-800 |
280-320 |
410/450 |
2.5-10mm |
127*52*107 |
The terms of warranty and spare parts
Our pellet mills are guaranteed with 1 year quality assurance from the date of goods shipment.
When we are talking about spare parts for a pellet mill, by and large, we are talking about die,
roller and bearing. Practically, that how often you will need to renew spare parts is depending on
what raw material you are making pellets from. Apparently, compared with making straw pellets,
pellet mill that are making wood pellets requires a higher frequency for changing spare parts. We
supply clients with high quality pellet mill dies, rollers, bearings and other parts. Clients are
available to order at anytime. If you need spare parts, please contact me or test message.
How to Choose A Perfect Flat Die Pellet Machine
Flat die pellet mill takes the circular motion as the principle. The press roller, main shaft and die
mould are of high quality alloy steel. There are common two design of flat die pellet machines:
rotating rollers with stationary die or running die with stationary rollers. Though the two kinds of
pellet mills can both make wood pellets and feed pellets, there is slightly difference. Roller driven
pellet machine is more suitable for making biomass pellets, especially for making hardwood pellets;
die driven pellet making has good performance in making feed pellets and soft wood pellets. Then,
let us talk about the engine of pellet press. There are two choices, flat die pellet mill with electric
motor and flat die pellet mill with diesel engine. Electric pellet mill is more energy-saving and
environmental protection, while you must make sure there is enough electricity in your pellet making sites .
What can I do when my Pellet mill can not produce pellets?
A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness
of mould and bad cooperation in new devices. After using oily material for a period, the pellet
machine can run smoothly.
B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the
gap to 1.5-2.5 mm.
C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term
service.
D: The material is too wet or too dry, resulting in low productivity. You'd better increase or decrease
the moisture to proper rate, generally 14%-16% in raw material.
Homemade Pellets Used as Stove Fuel
Home pellet stove is widely used in Europe and many other places in the world. It is an
environment-friendly method to keep warm and cook. Pellet stove uses less natural
resources as its fuel is generated from waste or recycled materials. The fuel it used can
be made at home. Here are a few tips for you to spend less money making the stove fuel
if you choose a pellet stove for heating.
You have to prepare raw materials along with a flat die pellet mill which is used to press the
materials into the needed fuel for home. There are a wide variety of raw materials that you
can use to make the fuel, such as fruit pits, different types of grass, corn cobs, barley star,
shelled corn, wheat, paper, etc. Your choice of materials decides the heating or cooking effect,
thus you need to look up the kind of stove to properly match the pellet fuel.
Our factory and certification
As 7/24 email and phone call service is available, I am ready to answer your any specific
questions regarding to our machinery and pellet mill in particular. In addition, we prepare
the teaching videos in terms of installation, lubrication, trial running, parts replacements and so forth.
| Our Services |
1. We provide 1 year guarantee.
2. We provide English manual and video for installation & operation.
3. If required, we could send technicians for installation and commissioning, training.
4. We provide feed formula and free spare parts. |
| FAQ |
| 1. How to order? |
After you decide to purchase, we will send you proforma invoice with our bank information,
bring this PI to the bank, and ask to make T/T for the payment. For single set, your machine can be ready within 30-45 days after we getting the payment, we will send to the port and deliver to you by sea. |
| 2. Related products? |
| KL150C,KL200C,KL300C,KL400C |
| 3. How to get to your factory? |
| Our company is located in Sanlihezi Village, Wenfeng Road, Laizhou, Shandong province, near Qingdao, if you arrive in Qingdao Liuting Airport, we can drive to Qingdao to pick you up to our factory. |
| 4. How long is your warranty period? |
| One year |
| 5. How does your factory do quality control? |
| Our factory has gained CE certificate and ISO certificate. " Quality is priority" we always pay great attention on quality controling from the begining to the end. |
Contact informaion:
| Sales Director: Ruby |
| Tel: +8615264530427 |
| Address: Sanlihezi Village, Wenfeng District, Laizhou ,China |
){kind=link}